
Minutes to Decimal Hours Converter
Payroll multiplies your rate by decimal hours, so 7 hours 45 minutes has to become 7.75. Convert either way, or look it up in the chart.
Minutes to decimal chart (0–59)
Decimal = minutes ÷ 60, rounded to 2 places (payroll standard). Three-place values: 1 min = 0.017, 7 min = 0.117.
Worked example
- Divide the minutes by 60: 45 ÷ 60 = 0.75. Add the whole hours: 7 + 0.75 = 7.75 decimal hours.
- Pay at $18.50 an hour: 7.75 × $18.50 = $143.38.
- The common mistake is typing 7:45 as 7.45. That pays $137.83 — $5.55 short for one day.
- Going back: 8.2 hours = 8 hours + 0.2 × 60 minutes = 8:12.
Tenths of an hour (6-minute increments)
Some time clocks round to the nearest 6 minutes, so every punch lands on a tenth of an hour.
| Minutes | Decimal hours |
|---|---|
| 6 min | 0.10 |
| 12 min | 0.20 |
| 18 min | 0.30 |
| 24 min | 0.40 |
| 30 min | 0.50 |
| 36 min | 0.60 |
| 42 min | 0.70 |
| 48 min | 0.80 |
| 54 min | 0.90 |
| 60 min | 1.00 |
Why payroll uses decimal hours
A pay rate is dollars per hour, so it can only be multiplied by hours written as a decimal number. Hours and minutes are base 60: 7:45 means seven hours and three quarters of an hour. Written as a decimal that is 7.75. If 7:45 goes into a spreadsheet or payroll form as 7.45, the system reads it as seven hours and 27 minutes.
The converter above does both directions. Type hours and minutes in the first box to get decimal hours. Type a decimal in the second box to get hours and minutes back.
How to use the converter
- Hours and minutes to decimal. Enter the whole hours and the minutes. The minutes can be over 59; 0 hours 135 minutes gives 2.25.
- Decimal to hours and minutes. Enter the decimal figure from a pay stub or timesheet to see it as a clock duration. This is the quickest way to check a stub that shows hours like 37.83.
- The chart. Every minute from 0 to 59 is listed with its two-place decimal. Print it and keep it next to a paper time sheet.
The formula: minutes divided by 60
Decimal hours = hours + minutes ÷ 60.
The converter rounds to two decimal places, which is what most payroll systems store. Two places are precise to about 36 seconds, so the rounding can move a total by a cent or two on a full week. A few values are worth knowing by heart: 6 minutes is exactly 0.10, 15 is 0.25, 30 is 0.50 and 45 is 0.75. Any minute count that is a multiple of 6 converts with no rounding at all, which is why some time clocks round punches to tenths of an hour.
Going back: minutes = decimal part x 60. 0.33 x 60 is 19.8, which rounds to 20 minutes.
A paper time sheet and a pay stub check
Adding up a paper time sheet. Your days this week were 8:10, 7:50, 8:25, 8:00 and 6:35. Convert each day: 8.17, 7.83, 8.42, 8.00 and 6.58. The total is 39.00 decimal hours. Adding the clock times directly gives 37 hours and 120 minutes, which is also 39:00, so the two methods agree. Converting each day first is how most payroll systems work, and it is where small rounding differences come from.
Checking a pay stub. Your stub shows 41.70 hours at $21.00. 0.70 hours is 42 minutes, so the stub says you worked 41 hours 42 minutes. If your own record says 41:45, the difference is 3 minutes, likely from punch rounding to the nearest tenth of an hour. At $21 with 1.70 of those hours at overtime, 3 minutes of overtime is worth about $1.58.
Where decimal hours go wrong
- Reading the colon as a decimal point. 8:30 is 8.50 hours, not 8.30.
- Rounding each day down. Dropping minutes every day adds up. Ten minutes a day over a year of 250 workdays is about 42 hours.
- Converting twice. If a timesheet already shows decimals, do not divide again.
- Mixing formats in one column. Keep a spreadsheet column either all decimal or all hours:minutes.
Related tools
To get the hours between two clock times first, use the hours calculator. For a full week of punches with breaks and overtime, use the time card calculator. If your time clock prints 24-hour times such as 1730, the military time converter turns them into AM and PM. The 7-minute rule guide explains how quarter-hour rounding works and when it is allowed.
Questions
How do I convert minutes to decimal hours?
Divide the minutes by 60 and add the whole hours. 7 hours 45 minutes is 7 + 45 ÷ 60 = 7.75 hours.
What is 15 minutes in decimal hours?
0.25 hours. 30 minutes is 0.50, 45 minutes is 0.75 and 20 minutes is 0.33.
What is 40 minutes as a decimal?
0.67 hours (40 ÷ 60 = 0.6667, rounded to two places). So 6 hours 40 minutes is 6.67 hours.
How do I convert decimal hours back to minutes?
Multiply the decimal part by 60. 8.2 hours is 8 hours plus 0.2 x 60 = 12 minutes, so 8:12. 5.75 hours is 5 hours 45 minutes.
Is 7.30 hours the same as 7 hours 30 minutes?
No. 7 hours 30 minutes is 7.50 hours. 7.30 decimal hours is 7 hours 18 minutes, so writing 7:30 as 7.30 underpays 12 minutes.
How do I calculate pay from hours and minutes?
Convert to decimal hours first, then multiply by the hourly rate. 38 hours 20 minutes at $17.50 is 38.33 x $17.50 = $670.78.
Sources
- U.S. DOL WHD — Fact Sheet #21: Recordkeeping Requirements under the FLSA · Daily and weekly hours records; time-clock rounding (29 CFR 785.48)
- 29 CFR 785.48 — Use of time clocks · Rounding to the nearest 5 minutes, tenth or quarter hour
- U.S. OPM — Pay & Leave: Pay Administration fact sheets · Computing hourly rates; 2,087-hour year; 24-hour clock in federal timekeeping