your week, added up

Time Card Calculator

Type when you clocked in and out. Breaks come off, overtime is split out by federal or state rules, and the total updates as you type.

Total 40:00Pay $740.00Details ↓

Federal rule for most hourly workers: 1.5× pay after 40 hours in a workweek. No daily overtime.

Pay period
OptionsRounding None
Breaks
Shifts per day
Type times like 8, 830 or 1730 · night shifts are fine
MonNov 16
In
Out
m
Break
8:008.00 h
TueNov 17
In
Out
m
Break
8:008.00 h
WedNov 18
In
Out
m
Break
8:008.00 h
ThuNov 19
In
Out
m
Break
8:008.00 h
FriNov 20
In
Out
m
Break
8:008.00 h
SatNov 21
In
Out
m
Break
— 
SunNov 22
In
Out
m
Break
— 
total hours40:0040.00 decimal hours · 5 days
gross pay$740.00at $18.50/h, before taxes
Regular $740.0040.00 h
Overtime 1.5× —
Double time 2× —

Overtime is figured per workweek. A night shift counts on the day it starts. Saved only on this device.

Worked example: a 46-hour week

  1. Monday to Thursday: 7:00 AM to 5:30 PM is 10:30 on the clock, minus a 30-minute unpaid lunch = 10.00 hours a day.
  2. Friday: 7:00 AM to 1:00 PM = 6.00 hours. Week total = 46:00 (46.00 decimal hours).
  3. Federal rule: hours over 40 in the week are overtime — 40.00 regular + 6.00 overtime. Pay = 40.00 × $20.00 + 6.00 × $30.00 = $980.00.
  4. California rule: every hour past 8 in a day is overtime, so Mon–Thu each add 2 overtime hours — 38.00 regular + 8.00 overtime = $1,000.00, or $20.00 more for the same hours.
Same week under different overtime rules at $20 an hour
RuleRegularOvertimeGross pay
Federal (FLSA)40.00 h6.00 h$980.00
California38.00 h8.00 h$1,000.00
Alaska38.00 h8.00 h$1,000.00

Overtime rules by state

Federal law (FLSA) sets overtime at 1.5× after 40 hours a week everywhere. 4 of the 51 jurisdictions below add daily overtime; where a state rule is stricter, the stricter rule wins. Pick a state above to load its rule into the time card.

State overtime thresholds
StateWeekly afterDaily after2× daily after7th day
Alabama40 h———
Alaska40 h8 h——
Arizona40 h———
Arkansas40 h———
California40 h8 h12 hYes
Colorado40 h12 h——
Connecticut40 h———
Delaware40 h———
District of Columbia40 h———
Florida40 h———
Georgia40 h———
Hawaii40 h———
Idaho40 h———
Illinois40 h———
Indiana40 h———
Iowa40 h———
Kansas46 h———
Kentucky40 h——Yes
Louisiana40 h———
Maine40 h———
Maryland40 h———
Massachusetts40 h———
Michigan40 h———
Minnesota48 h———
Mississippi40 h———
Missouri40 h———
Montana40 h———
Nebraska40 h———
Nevada40 h8 h——
New Hampshire40 h———
New Jersey40 h———
New Mexico40 h———
New York40 h———
North Carolina40 h———
North Dakota40 h———
Ohio40 h———
Oklahoma40 h———
Oregon40 h———
Pennsylvania40 h———
Rhode Island40 h———
South Carolina40 h———
South Dakota40 h———
Tennessee40 h———
Texas40 h———
Utah40 h———
Vermont40 h———
Virginia40 h———
Washington40 h———
West Virginia40 h———
Wisconsin40 h———
Wyoming40 h———

Thresholds come from each state's labor data file (checked 2026-11-18). Many state laws cover only some employers or jobs — see the note under the picker and your state's labor office.

How to fill in the time card

The calculator above works like a paper time sheet that adds itself up. You only need three things: when you started, when you stopped and how long your unpaid break was.

  1. Pick the overtime law. Leave it on Federal (FLSA) unless you work in a state with its own daily rules. Choosing a state loads its thresholds into the card.
  2. Set the pay period and workweek. Pick 1 week, 2 weeks or a month, then the day your employer’s workweek starts. Many employers start on Sunday, but it can be any fixed day. Ask payroll or check your pay stub if you are not sure, because the start day decides which hours land in which week for overtime.
  3. Type your punches. Enter times the quick way: 8 means 8:00, 830 means 8:30, 1730 means 5:30 PM. If the clock-out is earlier than the clock-in, the tool treats it as the next morning.
  4. Enter breaks. Use Minutes if you just know the length (30), or Start–end if your clock records the break punches.
  5. Add your hourly rate to see gross pay split into regular, overtime and double time.

If you work the same schedule every weekday, fill in Monday and use “Copy first day to weekdays”. For split shifts (for example, a lunch rush and a dinner rush), switch Shifts per day to Two.

What each setting changes

Rounding. Some time clocks round each punch. The card offers nearest 5, 6 (one tenth of an hour), 10 or 15 minutes. The federal regulation mentions three of them: 5 minutes, a tenth of an hour and a quarter hour. Quarter-hour rounding is often called the 7-minute rule: a punch 1 to 7 minutes past the quarter rounds back, 8 to 14 minutes rounds forward. Use rounding only if your employer actually rounds. If you want to check whether rounding is costing you, run the same week twice, once with No rounding and once with your employer’s setting. The 7-minute rule guide explains when rounding is lawful.

Overtime rule. Federal means 1.5x after 40 hours in the workweek and nothing daily. California applies its daily 8-hour and 12-hour lines and the seventh-consecutive-day rule. State rule lets you set the thresholds yourself. No overtime is for salaried exempt workers, contractors or anyone who just wants a plain total.

Workweek start. Overtime under the FLSA is counted per fixed 7-day workweek. It cannot be averaged across two weeks, even if you are paid biweekly.

How the card totals your hours

For each shift the tool subtracts the clock-in from the clock-out, takes off the unpaid break and keeps the result in minutes so nothing is lost to rounding. It then converts the total to decimal hours, which is what payroll multiplies by your rate.

For overtime, the tool walks through each workweek in order. Under the federal rule, the first 40 hours are regular and the rest are overtime. Under a daily rule, hours past the daily limit become overtime first, and then the weekly limit is checked on the remaining regular hours, so the same hour is never paid as overtime twice. Pay is regular hours x rate, plus overtime hours x 1.5 x rate, plus double-time hours x 2 x rate.

A biweekly night shift and uneven weeks

Night shift, biweekly pay. You work 10:00 PM to 6:30 AM, Sunday night through Thursday night, with a 30-minute unpaid meal break, at $22 an hour. Each shift is 8 hours 30 minutes on the clock and 8.00 hours paid. Five shifts make 40.00 hours per workweek, so there is no overtime under federal rules even though the shifts cross midnight. Over two weeks that is 80.00 hours and $1,760.00 gross. Because the tool counts each shift on the day it starts, the Thursday-night shift stays in the same workweek as the other four.

Uneven weeks. You are paid every two weeks at $18 an hour. Week one you work 50 hours, week two you work 30. The total is 80 hours, and it is tempting to call that “no overtime”. It is not: week one has 10 overtime hours. Pay is 70 regular hours x $18 = $1,260.00 plus 10 overtime hours x $27 = $270.00, for $1,530.00. Averaging the two weeks would pay $1,440.00, which is $90.00 short. Set the period to 2 weeks and the card splits the weeks for you.

Time card errors

  • Typing 7:45 as 7.45. 7 hours 45 minutes is 7.75 decimal hours. Use the minutes to decimal converter if you are copying totals into a spreadsheet.
  • Subtracting paid breaks. Short rest breaks are paid time. Only subtract meal periods where you were fully off duty. Which breaks your state requires is in our meal and rest break guide.
  • Using the wrong workweek start. Moving the start day can move hours from one week to the next and change the overtime total.
  • Mixing AM and PM. If a day shows a strange total like 20 hours, check whether a PM time was entered as AM. 24-hour entries (1730) avoid this; the military time converter helps if your clock prints 24-hour times.

If payroll’s total doesn’t match yours

The time card gives gross pay from hours and one rate. Your actual check can differ for a few reasons:

  • Regular rate. Federal overtime is 1.5x the regular rate, which includes shift differentials and non-discretionary bonuses. If you earn a night differential, your overtime rate is higher than 1.5x the base wage.
  • Exemptions and coverage. Some jobs and employers are exempt from overtime, and some state daily rules apply only to certain industries. The note under the state picker flags these.
  • Higher state thresholds. Kansas (46 hours) and Minnesota (48 hours) set weekly lines above 40, but most employers are covered by the federal 40-hour rule, so the card uses 40.
  • Taxes and deductions. The card stops at gross pay. To see take-home pay after federal, state and FICA taxes, enter the gross in the paycheck calculator.

Your entries are saved only in this browser. Use Download CSV or Copy for Excel to keep a record, and compare it with your pay stub each payday.

Questions

How do I calculate my hours on a time card?

For each day, subtract the clock-in time from the clock-out time, take off any unpaid break, then add the days together. 8:00 AM to 4:30 PM with a 30-minute lunch is 8 hours; five of those days make a 40-hour week.

How do I convert time card minutes to decimal hours?

Divide the minutes by 60. 7 hours 45 minutes is 7.75 hours, 8 hours 20 minutes is 8.33 hours. Payroll multiplies your rate by the decimal figure, not by the hours:minutes figure.

Is overtime figured per day or per week?

Under federal law (FLSA) it is per workweek: 1.5 times your regular rate for hours over 40. A few states add daily overtime — California after 8 hours in a day (double time after 12), Alaska and Nevada after 8 hours, Colorado after 12 hours.

Do paid breaks count as hours worked?

Short rest breaks, usually 5 to 20 minutes, count as hours worked under federal rules and must be paid. A bona fide meal period of 30 minutes or more where you are fully relieved of duty can be unpaid, so only that type of break should be subtracted.

Can my employer round my punches?

Federal rules allow rounding to the nearest 5 minutes, tenth of an hour or quarter hour, as long as it averages out and does not consistently cut paid time. With quarter-hour rounding, 1 to 7 minutes rounds down and 8 to 14 minutes rounds up.

How is a night shift that crosses midnight counted?

The calculator counts the whole shift on the day it starts. A shift from 10:00 PM Monday to 6:30 AM Tuesday with a 30-minute break is 8 hours on Monday.

How do I calculate a two-week time card?

Set the pay period to 2 weeks and enter both weeks. Overtime is still figured separately for each 7-day workweek, so 50 hours in week one and 30 in week two gives 10 overtime hours, not zero.

Sources

  1. U.S. Department of Labor, Wage and Hour Division — Overtime Pay · FLSA overtime: 1.5× the regular rate after 40 hours in a workweek
  2. U.S. DOL WHD — Fact Sheet #22: Hours Worked Under the FLSA · What counts as hours worked; meal and rest breaks
  3. U.S. DOL WHD — Fact Sheet #21: Recordkeeping Requirements under the FLSA · Daily and weekly hours records; time-clock rounding (29 CFR 785.48)
  4. 29 CFR 785.48 — Use of time clocks · Rounding to the nearest 5 minutes, tenth or quarter hour
  5. U.S. DOL WHD — State Minimum Wage Laws (premium pay after designated hours) · State daily and weekly overtime thresholds

Checked against the 2026 rules. How we calculate